HVAC Systems Alu-PET-Alu small bending radius aluminum flexible
Flexible air ducts are typically made of flexible plastic over a
metal wire coil to shape a tube. And they have a variety of
Flexible ducts are very convenient for attaching air outlets to the
rigid ductwork. It is commonly attached with long zip ties or metal
band claps. Besides, flexible ducts can tolerate moderate negative
Flexible Aluminum Duct are Made of laminated foil with strong helix
steel wire. Apply for low/medium/high pressure air ventilation and
air condition systems. Easy to install oval or round connection. At
high temperatures or in case of fire,no toxic gas commission.
1. Aluminum ducting is manufactured with a helically shaped
galvanized steel strip.
2. The strip locks together with the aluminum foil in order to form
an air tight and leak proof lock system.
3. It ensures excellent strength, making it perfect as a flexible
solution for a broad range of venting requirements from low or high
pressure heating, as well as for ventilation to air conditioning
1. Ventilation system,
2. Extraction of solvents,
3. Extraction of corrosive gas and fumes
4. Low pressure application,
5. Transfer of hot and cold air, Air conditioning
6. Vehicle construction,
7. Engine construction,
8. Exhaust fumes extraction
9. Generally used for smoke and dust exhausted.
10. bathroom for air exhausting
|Name||Aluminum Foil Duct|
|Feature||Flame resistant, heat resistant, small bending radius|
|Temperature||-20C~120C(140C momentary )|
|Length||10M or as request|
|Description||Single or double layer|
|Product Keywords||polyurethane duct,plastic ventilation duct,plastic ducting|
Fully extend ducting, then cut to exact length required using a
sharp knife and pliers/wire cutters. Use hose clips to fix.
1. SECURING THE DUCT TO THE DRYER
Slide one end of the duct over the exhaust outlet of the clothes
dryer in its permanent position and secure it with a worm gear
clamp (not included).
2. STRETCHING THE FLEXIBLE DUCT
Extend the flexible duct to the required length to reach the
existing duct work, leading to the outdoors. Cut off any excess
duct with a knife or scissors.
3. SECURING THE DUCT TO THE DUCT WORK
Secure the duct to the existing duct work with a worm gear clamp
Standard export carton packing.
3-20 days after confirming order,detail delivery date should be
decided according to
production season and order quantity.
We can supply several sizes of aluminum foil duct and offer
custom-made services. At the same time, we have strict testing
procedure .Every product must pass testing to ensure every duct is
qualified before shipment.
Thank you for visiting, if you have any questions, please contact