HVAC air refresh fire resistant customized sizes aluminum foil
Flexible duct must always be fully extended and bends made with
adequate radius to prevent corrugation of the interior with
consequent excessive resistance to air flow. For transport and site
handling the duct is compressed thus reducing freight, cartage and
storage cost. The strength of the duct minimize damage due
Flexible duct is used for low/medium/high pressure air ventilation
and air condition systems. Its a range of fully flexible thermally
insulated ducting, which has been specially designed for the HVAC
market. This range has been developed to minimize the heat gain or
loss resulting from the temperature differential between the
airflow and the surrounding ambient air. The vapor barrier prevents
condensation forming on the outside of ducts carrying air at lower
temperatures than the surrounding air.
Temperature range: -30 - +250 °C
The maximum air flow rate: <25-30m/s
Maximum working pressure: 3000Pa
Wire diameter: 0.8-1.4
Fire resistance: yes
Standard length: 10m
1. Aluminum ducting is manufactured with a helically shaped
galvanized steel strip.
2. The strip locks together with the aluminum foil in order to form
an air tight and leak proof lock system.
3. It ensures excellent strength, making it perfect as a flexible
solution for a broad range of venting requirements from low or high
pressure heating, as well as for ventilation to air conditioning
|Product name||Ventilation system several colors available round flexible aluminum
|Type||Hydroponics equipment (Ventilation system)|
|Feature||Ideal for HVAC, bath and general ventilating applications|
|Product size||Length: 10 meter|
|Package||1pcs per carton|
|Delivery time||About 25-30 days,depend on the quantity of Hydroponics aluminum
|Payment||T/T or Western Union|
Fully extend ducting, then cut to exact length required using a
sharp knife and pliers/wire cutters. Use hose clips to fix.
1. SECURING THE DUCT TO THE DRYER
Slide one end of the duct over the exhaust outlet of the clothes
dryer in its permanent position and secure it with a worm gear
clamp (not included).
2. STRETCHING THE FLEXIBLE DUCT
Extend the flexible duct to the required length to reach the
existing duct work, leading to the outdoors. Cut off any excess
duct with a knife or scissors.
3. SECURING THE DUCT TO THE DUCT WORK
Secure the duct to the existing duct work with a worm gear clamp
The aluminum flexible ducting is made from high quality aluminum.
The ducting is a 8 inch flexible tubing that weaves between spaces
in the walls, ceiling or floors. Our flexible ducting is used in
applications involving air, dust collection, fume removal, bathroom
venting, grow room cooling and more. Disclaimer- The use of
products should be installed professionally and not in enclosed
areas. Buyer represents that by purchasing products, buyer has
special knowledge or has consulted a professional on products use.
1. Ventilation system,
2. Extraction of solvents,
3. Extraction of corrosive gas and fumes
4. Low pressure application,
5. Transfer of hot and cold air, Air conditioning
6. Vehicle construction,
7. Engine construction,
8. Exhaust fumes extraction
9. Generally used for smoke and dust exhausted.
10. bathroom for air exhausting
1. Warranty: 1 year warranty for all products.
2. Products Quality:100% products inspection before delivery.
3. Just in time delivery: Normally,lead time is 30 days.
4. Customized Service: As we have our own molding
department,customized service can be provided.
5. Prompt Customers services:E-mail will be replied in 24 hours.
We can supply several sizes of aluminum foil duct and offer
custom-made services. At the same time, we have strict testing
procedure .Every product must pass testing to ensure every duct is
qualified before shipment.
Thank you for visiting, if you have any questions, please contact